Standard C Battery Size Movements - 5 3/8 in. Brass - HND1351G

$34.99

Shipping: Calculated at checkout

Model #: MVT3160

Buy in bulk and save :

  • Buy 5-9 and save $12.49
  • Buy 10-24 and save $13.04
  • Buy 25-49 and save $13.49
  • Buy 50+ and save $15.04

Product Description

Quantity:
Price Each:
1+
$34.99
5
$22.50
10
$21.95
25
$21.50
50
$19.95

Choose Shaft Length : By Clicking on The Image

MVT3160

Dials up to 1/4 in. thick

MVT3190

Dials up to 3/8 in. thick

MVT3260

Dials up to 5/8 in. thick

MVT3290

Dials up to 3/4 in. thick

Choose Shaft Length

Choose Free Hands : By Clicking on The Image

HND1350B

5 1/2 in. Black

HND1350G

5 1/2 in. Brass

HND1351B

5 3/8 in. Black

HND1351G

5 3/8 in. Brass

HND1061G

6 in. Brass

HND1061B

6 in. Black

HND1479B

6 1/4 in. Brass

HND1479G

6 1/4 in. Black

Choose Free Hands

Standard C Battery Size Movements



Our standard size movement has more power than our mini quartz movement. It can carry longer hands (5” to 6”) and runs up to 75% longer with its "C" cell battery. Choose from the 6 different hand styles shown below or from the 45 styles under 5” in the clock hands link at the bottom of the page.. These movements are perfect for clocks positioned in places where it may be difficult to change batteries and several years of battery life is desired.

Pricing includes choice of hour and minute hands (see below), clock hardware and a hanger.

FREE CHOICE of the six pairs here and 45 pairs of hour and minute hands and two different red tide hands is included. You just have to tell us what you would like. See the link to clock hands at the bottom of the movement page. Please do not assume that any clock hands you may have will fit, as the mounting holes are not standardized. Mounting hole sizes and shapes are shown at the top of the clock hands link. If you do not choose a FREE pair of hands with your movement purchase and later decide that you need them, there will be a $5.00 charge for us having to make a second shipment.

These C cell standard movements will operate a second hand, but second hands are considered optional. See the bottom of the movement page for the link to our selection of second hands. All models have a 7/16" shaft diameter so a 1/2" mounting hole is the correct size to drill in your case.

Available Accessories

The following accessories are available for the product above. You may purchase these at an additional cost, unless noted otherwise.