Continuous Sweep (Silent Motors) Mini-Quartz Movements - Dials Up to 3/8 in. thick - MVTCS11
Shipping: Calculated at checkout
Model #: MVTCS
Free Clock Hand :
At checkout you will be prompted to select your free set of hands for purchasing Continuous Sweep (Silent Motors) Mini-Quartz Movements
Buy in bulk and save :
- Buy 5-9 and save $5.45
- Buy 10-24 and save $6.00
- Buy 25-49 and save $6.45
- Buy 50-99 and save $7.00
- Buy 100+ and save $6.95
Continuous Sweep (Silent Motors) Mini-Quartz Movements
These new movements have a second hand that moves in a smooth
continuous motion, rather than the stepping motion of most quartz movements.
This change not only affects the appearance of the clocks you
make, but continuous sweep movements also have the added benefit of
being more quiet. You will not hear the "clicking" sound every second.
FREE CHOICE of over 40 pairs of hour and minute hands is included. You just have to tell us what you would like.
See the link to clock hands at the bottom of the movement page. Please do not assume that any clock hands
you have will fit, as the mounting holes are not standardized. Mounting hole sizes and shapes are shown at the
top of the clock hands link. If you do not choose a FREE pair of hands with your movement purchase and later
decide that you need them, there will be a $5.00 charge for us having to make a second shipment.
These continuous sweep movements will operate a second hand, but second hands are considered optional. See
the bottom of the movement page for the link to our selection of second hands. All models have a 5/16" shaft
diameter so a 3/8" mounting hole is the correct size to drill in your case.
- Continuous Second Hand Motion
- 1 Year guarantee
- American "I" Shaft-Diameter 5/16"
- Operates on 1 "AA" cell (not included)
- Choice Of Three Hand Shaft Lengths
2 3/16"w x 2 3/16"h x 5/8"d