American Made Mini Quartz Movements - Dials Up to 1/4 in. thick Electric AC - MVT7160ABATAAT
Shipping: Calculated at checkout
Model #: MVT7130
Free Clock Hand :
At checkout you will be prompted to select your free set of hands for purchasing American Made Mini Quartz Movements
Buy in bulk and save :
- Buy 5-9 and save $6.00
- Buy 10-24 and save $6.50
- Buy 25-49 and save $7.50
- Buy 50-99 and save $9.50
- Buy 100-249 and save $10.45
- Buy 250+ and save $10.95
American Made Mini Quartz Movements
Dimensions: 2 1/8 in w x 2 1/8 in h x 5/8 in d
Our mini-quartz movements are THE standard in the industry. Whether you are a hobbyist or a serious clock maker, our movement will fit your needs. Perfect for clock hands under 5” long. It runs on one "AA" battery and is accurate to within two minutes a year. To choose the proper shaft length, carefully measure the thickness of the material the movement shaft will go through and find the appropriate model in the table below. If you are using a glass or plastic cover over the movement, make sure you have at least 1/8 inch extra clearance as you will need room for a second hand or a minute hand cap nut.
FREE CHOICE of over 40 pairs of hour and minute hands is included. You just have to tell us what you would like. See the link to clock hands at the bottom of the movement page. Please do not assume that any clock hands you have will fit, as the mounting holes are not standardized. Mounting hole sizes and shapes are shown at the top of the clock hands link. If you do not choose a FREE pair of hands with your movement purchase and later decide that you need them, there will be a $5.00 charge for us having to make a second shipment.
These American made movements will operate a second hand, but second hands are considered optional. See the bottom of the movement page for the link to our selection of second hands. All models have a 5/16" shaft diameter so a 3/8" mounting hole is the correct size to drill in your case.
Click here for mounting instructions
- American "I" Shaft - Diameter 5/16"
- Optional Front Loading Metal Hanger
- Step Second Hand Motion
- Runs On 1 "AA" Size Battery
- OR upgrade to Electric (AC) Version
The following accessories are available for the product above. You may purchase these at an additional cost, unless noted otherwise.